Cartridge Filter Indonesia

Wattech RO Membrane

Kami adalah importir distributor agen dan supplier  terlengkap menyediakan berbagai kebutuhan spare part filter untuk keperluan industri dengan price harga terbaik

Wattech SW-8040 SWRO Membrane

Deskripsi :

Wattech SW-8040 SWRO Membrane

Kami adalah importir distributor agen dan supplier terlengkap untuk menyediakan berbagai kebutuhan spare part filter untuk keperluan industri dengan price harga terbaik

It is applicable to the desalination of raw water with salt concentration between 15000ppm and 40000ppm, and make removal for the boron is more than 90%. This membrane model was widely applied to the desalination of sea water and high concentration brackish water, concentration and recycle treatment for high salt wastewater.

Specifications & Parameters

Model SW-8040

Active Membrane Area ft(m2) 400(37.2)

Permeate Flow GPD (T/D) 9000(34.1)

Stable Rejection Rate (%) 99.7

Operating Limits and Conditions of Membrane Element :

Max.Working Pressure : 1200 psi (8.3MPa)

Max. FeedWater Temperature : 45 ℃

Max. Feed Water Flow : 17.0m3/h

Max. Feed Water SDI : 5.0

Free Chlorine Concentration of Feed Water : 0.1 mg/L

pH Range of Feed Water During Continuous Operation : 2 – 11

pH Range of Feed Water During Chemical Cleaning : 1 – 13

Max. Pressure Drop of Single Membrane Element : 15 psi (0.1Mpa)

Wattech SW-8040 Seawater RO Membrane

Deskripsi :

Wattech SW-8040 Seawater RO Membrane

Kami adalah importir distributor agen dan supplier terlengkap untuk menyediakan berbagai kebutuhan spare part filter untuk keperluan industri dengan price harga terbaik

It is applicable to the desalination of raw water with salt concentration between 15000ppm and 40000ppm, and make removal for the boron is more than 90%. This membrane model was widely applied to the desalination of sea water and high concentration brackish water, concentration and recycle treatment for high salt wastewater.

Specifications & Parameters

Model SW-8040

Active Membrane Area ft(m2) 400(37.2)

Permeate Flow GPD (T/D) 9000(34.1)

Stable Rejection Rate (%) 99.7

Operating Limits and Conditions of Membrane Element :

Max.Working Pressure : 1200 psi (8.3MPa)

Max. FeedWater Temperature : 45 ℃

Max. Feed Water Flow : 17.0m3/h

Max. Feed Water SDI : 5.0

Free Chlorine Concentration of Feed Water : 0.1 mg/L

pH Range of Feed Water During Continuous Operation : 2 – 11

pH Range of Feed Water During Chemical Cleaning : 1 – 13

Max. Pressure Drop of Single Membrane Element : 15 psi (0.1Mpa)