Cartridge Filter Indonesia

Spun Filter Cartridge

Kami adalah importir distributor agen dan supplier terlengkap menyediakan berbagai kebutuhan spare part water treatment untuk keperluan industri dengan price harga terbaik

FC PP 03 Micron 30 inch

Deskripsi :

FC PP 03 Micron 30 inch 

Kami adalah importir distributor agen dan supplier FC PP 03 Micron 30 inch terlengkap menyediakan berbagai kebutuhan spare part water treatment untuk keperluan industri dengan price harga terbaik

Description

PFI Spun PP Filter Cartridge is made to remove sand, dirt, rust and suspended particles, while maintaining high filtration ratings and an exceptional pollutant holding capacity.

Specifications  

Dimensions

Outside Diameter : 2.5” ( 63 mm )

Inner Diameter : 1.1” ( 28 mm ), 1.2” ( 30 mm )

Length : 30 inch

Material of Construction

Filter Media : Pure Polypropylene

End Caps : Pure Polypropylene ( SOE type )

Core : Pure Polypropylene

Gasket/O-Ring : Silicone ( DOE type )

Performance

Micron Rating :  3 μm

Max Differential Temperature : 2.0 Bar @ 69.8°F (21°C)

Max Operating Temperature : 179°F (82°C)

Spun PP Filter Cartridge

Deskripsi :
Spun PP Filter Cartridge

PT PROFILTER INDONESIA  adalah perusahaan importir dan agent spare part water treatment dengan stock Spun PP Filter Cartridge lengkap jaminan kualitas terbaik.

PFI Melt-Blown Filter Cartridge are made up of 100% polypropylene fibers. The fibers have been carefully spunned together to form a true gradient density from outer to the inner surface. Filter cartridges are available with both core & without core version. The Filter Cartridge Spun superior structure remains integral even under severe operating conditions and there is no media migration. Polypropylene fibers are blown continuously on the central molded core, without any binders, resins or lubricants.

PFI PP Melt Blown Filter Cartridge-MG Series is fusing and intertwined of polypropylene resin without any chemical glues.

Spesifikasi Spun PP Filter Cartridge

Sizes : 10 – 50” Long

Inner Diameter : 28 mm

Outer Diameter : 63 mm (2.5”)

Micron Rating : 1 – 5µ

Media Material : Polypropylene

Center Core : Polypropylene

Feature Filter
  1. Free of surfactants, binders and adhesives
  2. Excellent flow with low pressure drop
  3. High dirt holding capacity
  4. 100 % Polypropylene for wide chemical compatibility.
  5. High strength & pressure resistance
  6. One piece construction up to 1016 mm & more
  7. Nominal & absolute filtration rating

Filter Configuration

  1. Double Open Type (DOE Type)
  2. 226 O’ Ring Design / Bayonet
  3. 226 O’ Ring Design / Flat
  4. 222 O’ Ring Design / Bayonet
  5. 222 O’ Ring Design / Flat

PP110-050-20 Jumbo Filter Cartridge

Deskripsi :

PP110-050-20 Jumbo Filter Cartridge 

Kami adalah importir distributor agen dan supplier Cartridge Filter terlengkap menyediakan berbagai kebutuhan spare part filter untuk keperluan industri dengan price harga terbaik

Large Diameter Polypropylene Melt Blown Cartridges

Graded Pore Structure Increases Dirt Holding Capacity and Filtration Efficiency

Easy and Safe Cartridge Incineration or Disposal

100% Polypropylene Construction

Free of Surfactants, Anti-static Agents, Binders and Adhesives

All Material Meet FDA Requirements for Food and Beverage Contact

Special Outside Diameter of 4.3” (110mm)

Can Retrofit Most Existing Cartridges Used in Large Diameter Housings

Materials of Construction

Filter Media: Polypropylene

Dimensions:

Outside Diameter: 4.3” (110mm)

Inside Diameter: 1.1” (28mm)

Lengths: 10” to 20” (254mm to 508mm)

Retention Ratings: 1 μm

Maximum Operating Pressure

50 psid (3.45 bar) @ ambient

25 psid (1.72 bar) @ 140°F (60°C)