PPMG63-05-40 Meltblown Filter Cartridge OD 63 mm 5 micron

Description

PPMG63-05-40 Meltblown Filter Cartridge – Polypropylene Mini Groove Solusi Filtrasi SWRO BWRO

PFI PPMG Filter Cartridge adalah filtrasi sediment dengan bahan polypropylene spun bonded, pada permukaan luar filter tersebut dibuat ulir (beralur) sehingga menjadikan luas permukaan filtrasi lebih besar, supaya dapat memperkecil pressure drop saat operasional. Lapisan luar yang longgar menangkap partikel besar, dan lapisan dalam yang padat secara bertahap menangkap partikel yang lebih kecil, yang memastikan penyaringan yang dalam, kapasitas menahan kotoran yang tinggi, dan masa pakai yang lama. Filter ini sangat ideal untuk pre-treatment industrial reverse osmosis system, lebih efektif dan efisien.

Feature

95% High Effieciency Grade Meltblown Polypropylene Filter Cartridges.
Precision process control of fiber diameter and layer density tunes the media to achieve targeted retention efficiency and ensure consistent performance.
3-layer filtration structure ensure high dirt holding capacity, high efficiency, and long service life.
All polypropylene construction presents excellent compatibility with a wide range of chemicals.
Resists contaminant unloading, even at elevated differential pressures.
All end configurations available (glued or thermally-bonded).
Grooved exterior increases surface area.
Easy cartridge incineration and disposal.
Free of additives, wetting agents, binders and silicone.
A reliable and economical solution for pre-filtration in many applications.

Specification PPMG63-05-40 Meltblown Filter Cartridge

Dimensions
- Outside Diameter : 60 – 63 mm
- Inner Diameter : 28 mm
- Length : 10 – 50 inch
Material of Construction
- Filter Media : Polypropylene
- End Caps : Polypropylene for SOE type
- Core : with or non core (Polypropylene)
- Gasket/O-Ring : Silicone, EPDM, NBR, Viton ( for SOE Models )
Performance
- Micron Rating : 1 – 100 μm
- Max Differential Temperature : 2.0 Bar @ 69.8°F (21°C)
- Max Operating Temperature : 179°F (82°C)

Feature Filter Models

Free of surfactants, binders and adhesives
Excellent flow with low pressure drop
High dirt holding capacity
100 % Polypropylene for wide chemical compatibility.
High strength & pressure resistance
One piece construction up to 1016 mm & more
Nominal & absolute filtration rating
Configuration
- Double Open Type (DOE Type)
- 226 O’ Ring Design / Bayonet
- 226 O’ Ring Design / Flat
- 222 O’ Ring Design / Bayonet
- 222 O’ Ring Design / Flat