Cartridge Filter Indonesia

High Flow Filter Cartridge

Kami adalah importir distributor agen dan supplier terlengkap untuk menyediakan berbagai kebutuhan spare part filter untuk keperluan industry dengan price harga terbaik

HFM40P1EA High Flow Radial Pleat Filter Cartridge 1 micron

Specification

Filter Media : Polypropylene, Glass Fiber

Length : 40″(1016mm) & 60″(1524mm)

Outside Diameter : 6 inch (152.4 mm)

Inside Diameter : 3 inch (76.2 mm)

Filtration Rating : 1 μm

Support/Drainage : Polypropylene (PP)

End Cap Material : Glass fiber reinforced Polypropylene (PP)

Seal Material : EPDM,Buna-N,Silicon

Operation the filter

Maximum Flow Rate : 1560 LPM

Maximum Operating Temperature : 80oC

Maximum Forward Differential Pressure 50 psid @ 68oF (3.4 bar @ 20oC)

Recommended Change-out Differential Pressure 35 psid @ 68oF (2.4 bar @ 20oC)

HFCP-A40-40E High Flow Filter Cartridge

Spesifikasi

Media : Polypropylene

Core , Support/Cage , End Cap : Polypropylene

O-Ring : EPDM

Outside Diameter : 6 inch

Nominal Length : 40 inch

Micron size : 40                                

Pastikan produk yang anda dapatkan adalah asli dari PFI Watermaker dengan kualitas terbaik

HFCP-A10-40E High Flow Filter Cartridge

Spesifikasi

Media : Polypropylene

Core , Support/Cage , End Cap : Polypropylene

O-Ring : EPDM

Outside Diameter : 6 inch

Nominal Length : 40 inch

Micron size : 10                                             

Pastikan produk yang anda dapatkan adalah asli dari PFI Watermaker dengan kualitas terbaik

HFCP-A1-40E High Flow Filter Cartridge

Spesifikasi

Media : Polypropylene

Core , Support/Cage , End Cap : Polypropylene

O-Ring : EPDM

Outside Diameter : 6 inch

Nominal Length : 40 inch

Micron size : 1                                               

Pastikan produk yang anda dapatkan adalah asli dari PFI Watermaker dengan kualitas terbaik

PFI T7 MAXFLO High Flow Filter Cartridge

FEATURES

  • FDA Compliant filter material
  • Dense Polypropylene media pleats
  • Graded pore depth media composites.
  • 1 ~ 100 micron range, 95% nominal rating.
  • Fiber glass reinforced hard shell for better pressure resistance
  • Broad chemical compatibilities.
  • Contaminants are trapped inside the filter for easy removal.
  • Extended large filter surface area.
  • Large contaminant retention capacities
  • Extended filter service life.
  • High flow rate
  • Low pressure drop
  • 2.40 Bar suggested change-out pressure differential

Pastikan produk yang anda dapatkan adalah asli dari PFI Watermaker dengan kualitas terbaik

HFCP-A5-40E High Flow Filter Cartridge

Spesifikasi

Media : Polypropylene

Core , Support/Cage , End Cap : Polypropylene

O-Ring : EPDM

Outside Diameter : 6 inch

Nominal Length : 40 inch

Micron size : 5                                     

Pastikan produk yang anda dapatkan adalah asli dari PFI Watermaker dengan kualitas terbaik

HFCP-A20-40E High Flow Filter Cartridge

Spesifikasi

Media : Polypropylene

Core , Support/Cage , End Cap : Polypropylene

O-Ring : EPDM

Outside Diameter : 6 inch

Nominal Length : 40 inch

Micron size : 20                      

Pastikan produk yang anda dapatkan adalah asli dari PFI Watermaker dengan kualitas terbaik

High Flow Radial Pleat 3M Filter Cartridge 10 micron Replacement

Specification

Filter Media : Polypropylene, Glass Fiber

Length : 40″(1016mm) & 60″(1524mm)

Outside Diameter : 6 inch (152.4 mm)

Inside Diameter : 3 inch (76.2 mm)

Filtration Rating : 10μm

Support/Drainage : Polypropylene (PP)

End Cap Material : Glass fiber reinforced Polypropylene (PP)

Seal Material : EPDM,Buna-N,Silicon

Operation the filter

Maximum Flow Rate : 1560 LPM

Maximum Operating Temperature : 80oC

Maximum Forward Differential Pressure 50 psid @ 68oF (3.4 bar @ 20oC)

Recommended Change-out Differential Pressure 35 psid @ 68oF (2.4 bar @ 20oC)

PFI HFM40P1EA High Flow Radial Pleat Filter Cartridge

Specification

Filter Media : Polypropylene, Glass Fiber

Length : 40″(1016mm) & 60″(1524mm)

Outside Diameter : 6 inch (152.4 mm)

Inside Diameter : 3 inch (76.2 mm)

Filtration Rating : 1 μm

Support/Drainage : Polypropylene (PP)

End Cap Material : Glass fiber reinforced Polypropylene (PP)

Seal Material : EPDM,Buna-N,Silicon

Operation the filter

Maximum Flow Rate : 1560 LPM

Maximum Operating Temperature : 80oC

Maximum Forward Differential Pressure 50 psid @ 68oF (3.4 bar @ 20oC)

Recommended Change-out Differential Pressure 35 psid @ 68oF (2.4 bar @ 20oC)

PFI High Flow Filter Cartridge Elements 25 micron

High Flow filter elements are designed for high flow rates up to 113 m3/hour (500 US gal/min) in a single 1524 mm (60 inch) cartridge. They utilize PFI-HF media with unique, laid-over pleat geometry. The PFI High Flow element is a large diameter, single open ended, pleated cartridge with an inside to outside flow pattern and a core-free construction.

Materials of Construction

  • Filter Medium Polypropylene
  • Support Cage or Outer Wrap Polypropylene
  • End Caps and Handle Polypropylene (10% glass fiber reinforced)
  • O-ring Seal Ethylene Propylene Rubber

Specification :

Nominal Length

  • 1016 mm (40 in.)
  • 1524 mm (60 in.)

Micron Size : 2 , 4.5 , 5, 10, 25, 50 micron

HFCP-A10-60E Filter Cartridge

Penjelasan HFCP Cartridge Filter

PFI HFCP pleated high flow filter cartridge is constructed with 6 inch (152 mm) large diameter which offers super high flow rate, it can greatly save water treatment plant footprint and reduce filter change-out cost.

Inside-out flow operation keeps all the contaminants inside the filter thus making ment process more convenient.

Available filter media s polypropylene and microfiber glass with pore size from 0.5μm to 100μm. PFI HFCP series provides a more cost-effective solution to Pall Ultipleat high flow filters.

Filter Cartridge Max Flow Specifications

Media/Support/Cage: Polypropylene

End caps: Polypropylene

O-rings: EPDM, Silicone, Buna-N, Viton

Micron ratings: 1 – 100 μm

Dimensions

Nominal lengths : 20″, 40″, 60″

Outside diameter : 6.0″ (15.2 cm)

Surface area:

24 ft 2. (2.2 m2) per 20″ elementt

49 ft 2. (4.6 m2) per 40″ element

73 ft 2. (6.8 m2) per 60″ element

Operating Parameters

Maximum operating temperature:

77°F @ 50 psid (25°C @ 3.4 bar)

Recommended changeout differential pressure: 35 psid (2.4 bar)

Maximum flow rates :

  • 60″ element up to 500 GPM (1892 lpm)
  • 40″ element up to 350 GPM (1325 lpm)
  • 20″ element up to 175 GPM (662 lpm)

PFI NHF200-640-EXE High Flow Filter Cartridge

PFI NHF series filter cartridge’s high surface area and large diameter provide higher flow rate, service life, dirt holding capacity and lower maintenance/disposal costs. PFI NHF series center core can resist higher differential pressure, and its double o-rings design provides better sealing effect.  In addition, it provides  optional   polypropylene and glass fiber media, which can be applied to wide chemical compatibility.

Specifictation

Materials of Construction

Filter Media :  Polypropylene

Hardware :  Polypropylene

Sealing : Thermal  Bond

Support  Material :  Polypropylene for PP media

0-rings : EPDM

Dimensions

Outside  Diameter :  6″ {152mm)

Length :  40″

Micron Ratings 0.5, 1, 5, 10, 20, 30, 40, 100 µm

Maximum Operating  Temperature : 180″F (82″C)

Recommended Change Out Differential Pressure 35 psid (2.4 bar)

Applications

Food and Beverage, Seawater  Desalination,   Cooling Water, Industrial Water,  RO Pre-filtration,  Amine Circulation Filtration, Process Water and Waste Water Treatment, etc

Horizontal Pleated High Flow Filter Cartridge

Specification Horizontal Pleated High Flow Filter Cartridge

Filter Media : Polypropylene

Length : 40″ (1016mm)

Outside Diameter : 6.5 inch (165 mm)

Inside Diameter : 3 inch (76.2 mm)

Filtration Rating : 1 μm

Support/Drainage : Polypropylene (PP)

End Cap Material : Glass fiber reinforced Polypropylene (PP)

Seal Material : Silicon

Operation Horizontal Pleated High Flow Filter Cartridge

Maximum Flow Rate : 350 gpm (79.5 m3/hr)

Maximum Operating Temperature : 80oC

Maximum Forward Differential Pressure 50 psid @ 68oF (3.4 bar @ 20oC)

Recommended Change-out Differential Pressure 35 psid @ 68°F ( 2.4 bar @ 20 °C)

Horizontal Pleated Filter Cartridge

Specification

Filter Media : Polypropylene

Length : 40″ (1016mm)

Outside Diameter : 6.5 inch (165 mm)

Inside Diameter : 3 inch (76.2 mm)

Filtration Rating : 1 μm

Support/Drainage : Polypropylene (PP)

End Cap Material : Glass fiber reinforced Polypropylene (PP)

Seal Material : Silicon

Operation the filter

Maximum Flow Rate : 350 gpm (79.5 m3/hr)

Maximum Operating Temperature : 80oC

Maximum Forward Differential Pressure 50 psid @ 68oF (3.4 bar @ 20oC)

Recommended Change-out Differential Pressure 35 psid @ 68°F ( 2.4 bar @ 20 °C)